To give your wireless Internet a much-needed boost, a WiFi Extender is what you need. There are some nooks and crannies in your home, even though you already have a wonderful internet connection, that is so internet-dead you can put your children in time-out there for a well-deserved internet break.
But if your goal is to get your house completely shielded by the internet, it would be important to have a WiFi extender. A WiFi extender (or, if you sound fancy, a wireless range extender) is a stand-alone system that picks up and boosts your WiFi router's current WiFi signal.
It sounds like a fantasy, huh?
But the trick is to position the extender properly so that the WiFi signal can be re-broadcast efficiently.
Placement of WiFi Extender
Until tackling the WiFi extender positioning, you'd better warm-up, because you're going to switch around... a tonne. A WiFi extender's usefulness depends heavily on its positioning. And because a strategy is essential to positioning your WiFi extender properly, we will start with a floor plan.
Mark your WiFi router's position, then presume this would be the nucleus of the internet. In addition to the internet dead areas in your building, you should remember where your AC outlets are. Between your WiFi router and your worst dead spot, consider locating an AC outlet nearby. This is where you want your extender to be positioned.
Of course, whether you live in a one-story house or a multi-tiered one depends on this placement.
Place your extender either next to the ceiling of the first floor or on the real floor of the second floor if you reside in a two-story building. Confusing?
Think of it as putting the extender as you can get in the most central of places.
Furthermore, strive to keep it away from home electronics that emit waves of some kind, like microwaves, your TV, and your landline (if you still have one of those). If they start running on the same frequency, these devices can interfere with your extender (and your real Wi-Fi router).
Important stuff to look out for
Occasionally, odd bits of furniture will besiege you. You can need to position the extender or wedge it into a bookshelf over a random chair. And if your extender has antennas, for a stronger signal, feel free to mess around with their path (or turn them). Even, to make a cheap WiFi reflector, you should break out the aluminum foil.
You will have to watch out for walls because they can severely impair the signal-boosting abilities of your extender. Try to stop inserting your extender between a wall and your WiFi router first. Map a clear line of sight between your router and your extender, which will assist enormously with the power of the signal. Second, look at the wall materials more carefully. If you are keeping your internet wellbeing in mind, drywalls are a perfect alternative. On the other side, walls with insulation cause a touch of problems. Brick, brick, and steel walls; they're not sign-friendly either.
Tips: How to Configure a WiFi Extender
It is now time to set it up after wasting too much time trying to locate the right WiFi extender positioning. No worries, from here were going to take it nice and slow. For Linksys Extender Setup, you can visit the official site of Linksys, ie, extender.linksys.com.
1. Electrical Control
Plug the power cord into a wall socket and the other end of the cable into the WiFi extender to power up the extender.
2. Connectivity Inside
For this section, you would require two Ethernet cables, but your WiFi extender kit would most likely be included with it.
At the back of the extender, attach the first Ethernet cable to the Internet socket and the same port found on your router.
Plug it into the LAN port (it would be called LAN) on the extender using the second Ethernet cable and the other end into a laptop already wired to the internet.
3. The Actual Configuration for Apps
Launch your favorite web browser now that you have all your toys in order and enter the IP address of your extender in the URL area.
You will find the IP address of your extender at the bottom of your extender, in its user manual, or, if youre lucky, it might automatically fill in the login window of the extender until prompted.
Any registration details you will be asked to fill in, which you should have no trouble finding in the user manual.
Now, depending on the manufacturer of your WiFi extender, this next stage can change. In the login pane, you can traditionally find wireless settings or a wireless tab.
If so, feel free to insert the wireless name of your network in the SSID area. Save-or Implement-your hard work.
Finally, you can unplug the extender from the Ethernet cables and position it where it belongs.
4. Find out the pace
Go testing the internet speed before enthusiastically patting yourself on the back for a job well done. Seeing how well the WiFi extender is running would be a crowning moment.
Enjoy your WiFi newly-revived
Nothing beats getting a good WiFi signal in the deepest areas of the basement to the smallest nooks in the attic, but it was quite the ride.
Hope you loved learning more about how a WiFi extender can be set up. You should figure out how to keep things steady now that you have such a fantastic internet connection, and some delightful tricks to make the most of your gadgets.
Visit ap. setup for Wavlink Extender Setup.